Rough opening: Under the larger load of the machine tool, the largest possible tool should be selected for most local conditions, the largest possible feed amount, and the fastest possible feed. Under the condition of the same knife, the feed is proportional to the amount of feed. Under normal ci...

Repetitive production parts processed by CNC lathes: the use of CNC grinders accounts for a relatively high proportion of process preparation man-hours

The normal use of CNC lathes must meet the following conditions: the power supply voltage fluctuation at the locations of the machine tool is small, the ambient temperature is less than 30 degrees Celsius, and the relative temperature is less than 80%. Generally, CNC lathes are installed in machin...

Five-axis CNC machining is a mode of CNC machine tool processing. The machining centers we usually use now are generally three-axis three-linked machining centers. Three-axis refers to the X-axis, Y-axis and Z-axis of the machining center, and of course there are Four-axis machining center

The biggest disadvantage of the five-axis machining center is high manufacturing cost, expensive price, large area of the machine tool, complex machine structure, etc. Therefore, few customers in the industry use this type of machining center, and the most used in many types of machining centers ...